Vesica Piscis

Make the vesica piscis symbol at an exact size: two circles of the same radius, each passing through the other’s centre, and the lens where they overlap. Start from one of our 15 designs: two circles, the lens filled, the two equilateral triangles, a ratio sheet that prints the lens height, width, area and outline for your size, the lens alone (mandorla), an upright version, a chain of three or four circles, a colouring page, a tracing sheet, five compass construction steps, a stencil or a sheet of small lenses. Set the circle radius in inches or centimetres on US Letter or A4 and download a PDF, 300 DPI PNG or SVG. Nothing is uploaded.

100% private — everything runs in your browser. Everything runs in your browser; nothing is uploaded.

100% private — runs in your browser

Print at 100% (Actual size). Each circle passes through the other’s centre, so the lens is √3 × r tall and r wide (√3 : 1 = 1.7321 : 1).

Vesica piscis

Lines and colours

Size and paper

Runs in your browser with our own code: nothing you choose is uploaded or saved. The drawings are our own. You may use what you make here, including commercially, with no credit needed.

How to make and print a vesica piscis

  1. Pick a design: two circles, lens, triangles, ratio sheet, mandorla, chain, steps or stencil.
  2. Turn the circles, lens fill, triangles, height and width lines, points and letters on or off.
  3. Set the circle radius (r) in inches or cm; the lens is √3 × r tall and r wide.
  4. For a stencil, set the bridge width between the cut-outs.
  5. Download the PDF and print at 100% (Actual size); check the 1 in (or 2 cm) bar.

What you can use it for

  • Learning the first compass construction in geometry
  • Geometry lessons on equilateral triangles and √3
  • Logo, arch and window layouts at the √3 : 1 ratio
  • Colouring and tracing sheets
  • Cutting a stencil or vinyl from the SVG
  • A starting grid for patterns of overlapping circles

The 15 vesica piscis designs

DesignCirclesDirectionShownLayout
Vesica piscis: two circles2Side by sidecirclesOne figure
Lens filled2Side by sidecircles, lens fillOne figure
With the two equilateral triangles2Side by sidecircles, triangles, lettersOne figure
Ratio sheet: √3 : 1 with measurements2Side by sidecircles, triangles, height / width, letters, ratio panelOne figure
Height and width lines2Side by sidecircles, lens fill, height / widthOne figure
Upright (one circle above the other)2Uprightcircles, lens fillOne figure
Lens alone (mandorla outline)2Side by sidelens fillOne figure
Chain of 3 circles (2 lenses)3Side by sidecircles, lens fillOne figure
Chain of 4 circles (3 lenses)4Side by sidecircles, lens fillOne figure
Colouring page: bold outlines2Side by sidecirclesOne figure
Tracing sheet: light grey lines2Side by sidecircles, trianglesOne figure
Gold on navy2Side by sidecircles, lens fillOne figure
Construction steps (Euclid I.1)2Side by sidecirclesConstruction steps
Stencil: lens and two crescents, 2 mm bridges2Side by sidecirclesStencil
Sheet of small lenses (0.6 in radius)2Side by sidecircles, lens fillSheet of small figures

All are our own drawings. Each design is a starting point: change any part, the colours, line width, radius and paper.

Vesica piscis measurements

MeasurementIn units of the radius r
Distance between the centres (AB)1 r
Lens height (CD)1.7321 r (√3 r)
Lens width1 r
Height : width1.7321 : 1 (√3 : 1)
Triangle sides (ABC, ABD)1 r (equilateral)
Each lens edge120° arc of one circle
Lens area1.2284 r² ((2π/3 − √3/2) r²)
Lens outline4.1888 r ((4π/3) r)
Whole figure3 r wide, 2 r tall

Our tests check the height, width and triangle sides to a trillionth of the radius, and the area and outline against numeric integration.

Measurements for common sizes

Circle radius rLens heightLens widthLens areaLens outline
1 in43.9941 mm25.4 mm792.495 mm²106.3953 mm
2 in87.9882 mm50.8 mm3169.98 mm²212.7905 mm
5 cm86.6025 mm50 mm3070.9242 mm²209.4395 mm
10 cm173.2051 mm100 mm12283.697 mm²418.879 mm

Construction steps

StepWhat you draw
1Draw a circle of radius r round point A. Keep the compass at this setting.
2Mark B anywhere on the circle and draw a circle round B: it passes through A.
3Mark C and D where the two circles cross: the lens between them is the vesica piscis.
4Join A, B and C, and A, B and D: two equilateral triangles with sides r (Euclid, Elements I.1).
5Draw CD (the lens height, 1.732 × r) and the line through A and B (the width AB = r).

Each step adds to the one before and the last step is the whole figure; earlier lines print grey and the new ones dark.

Chains of circles

CirclesLensesWidthPoints markedLargest radius, US Letter
213 r42.5 in
324 r71.875 in
435 r101.5 in
546 r131.25 in

Sizes

PaperLargest radius, portraitLargest radius, landscapeLargest radius, portrait (cm)
US Letter2.5 in3.316 in6.35 cm
A42.422 in3.2 in6.15 cm
BridgeSmallest radius, seed of lifeSmallest radius, vesica piscis
1 mm3.7321 mm1 mm
2 mm7.4641 mm2 mm
3 mm11.1962 mm3 mm
5 mm18.6603 mm5 mm

History

The vesica piscis appears in the first proposition of Euclid’s Elements, as the first step in building an equilateral triangle on a given line (source: Wikipedia, Vesica piscis, read 12-Nov-2026). This page is about the geometry only: we make no claims about meanings, energy or health.

Which tool to use

You wantUse
Two circles and the √3 : 1 lensVesica Piscis
Seven circles and the six-petal rosetteSeed of Life
The 19-circle flower and larger gridsFlower of Life
The golden ratio (1.618 : 1) instead of √3 : 1Golden Ratio Calculator

For other proportions, use the Golden Ratio Calculator; to measure the 60° angles, the Online Protractor; for a triangle grid, the Isometric Graph Paper.

What prints

DownloadWhat is in it
PDFThe page at real size, vector: circles, petals, lines, points and labels, with a 1 in (or 2 cm) check bar
PNG 300 DPIThe page as a picture
SVGThe page at real size, with fills, circles, lines, ring and points in separate groups (for cutting machines and drawing programs)

More free tools

Drawing with a compass?

Geometry and pattern tools that run privately in your browser, with no sign-up and no watermark.

See all free tools →

Frequently asked questions

What is a vesica piscis?

The lens-shaped overlap of two circles of the same size, each drawn through the other’s centre. The name is Latin for the bladder of a fish; the lens on its own is also called a mandorla, Italian for almond (source: Wikipedia, Vesica piscis, read 12-Nov-2026).

What is the vesica piscis ratio?

The lens is √3 times as tall as it is wide: with circles of radius r, its height is √3 × r (about 1.7321 r) and its width is r. The tool works these out for your radius and the ratio sheet prints them.

Why √3?

The two centres and either crossing make an equilateral triangle with sides r. Its height is √3 / 2 × r, and the lens height is two of those heights, so √3 × r.

How do I draw it with a compass?

Draw a circle round a point A and keep the compass at that setting. Mark a point B on the circle and draw a circle round B: it passes through A. The two crossings are C and D. Joining A, B and C gives an equilateral triangle; this is the first proposition of Euclid’s Elements.

What are its area and outline?

With radius r the lens area is (2π/3 − √3/2) r², about 1.2284 r², and its outline is (4π/3) r, about 4.1888 r, because each edge is a 120° arc. Our tests check both against a numeric measurement.

What is the chain of circles?

Three or more circles in a row, each through its neighbour’s centre. Each pair makes its own vesica piscis, so n circles give n − 1 lenses.

How does the stencil work?

The lens and the two crescents either side of it are the cut-outs. Each is shrunk by half the bridge width, so the strip between them is at least the bridge you set and no piece is cut loose.

Is anything uploaded?

No. The figure is drawn by JavaScript in your browser. Nothing you choose is sent anywhere or saved when you close the page.

Is it free?

Yes. There is no sign-up, no watermark and no limit.