AAC to MP3
Convert AAC to MP3 online for free — turn .aac and .m4a audio into MP3 files that work with every device, app and car stereo. Choose 96 to 320 kbps, mono or stereo, trim, fade and normalise. Runs privately in your browser.
100% private — your audio is converted on your device, never uploaded. Conversion happens on your device; nothing is uploaded.
Your browser decodes the audio and an open-source MP3 encoder (LAME, via lamejs) converts it on your device — nothing is uploaded. Works with MP4, MOV, M4A, WebM, MKV, WAV, OGG and more; very long files need plenty of memory, so trim if your browser struggles.
How to convert AAC to MP3
- Drop your AAC or M4A file in the box.
- Choose the MP3 quality and stereo or mono.
- Optionally trim, fade or normalise.
- Click Convert to MP3, preview and download.
What you can use it for
- Play AAC recordings on older MP3 players and car stereos
- Use audio in apps and sites that only accept MP3
- Share recordings across devices
- Convert podcast and radio recordings
More free tools
Editing images?
Convert, compress, resize and vectorize images with our free, private image tools.
See all free image tools →Frequently asked questions
AAC or MP3 — which is better?
AAC sounds slightly better at the same bitrate, but MP3 is supported everywhere. Converting at 192 kbps or higher keeps the quality high.
Which quality should I choose?
192 kbps sounds excellent for music and keeps files small; 320 kbps is the highest MP3 quality. For podcasts and speech, 96–128 kbps in mono is plenty.
Can I convert just part of the file?
Yes — set a start and end time (minutes:seconds) before converting. Fade in and out smooths the cut edges.
Is there a file size limit?
There's no upload limit because nothing is uploaded, but the whole file is decoded in your browser's memory. Files up to a few hundred MB work well on most computers; for very long recordings, convert in parts.
Is my file uploaded?
No. Decoding and MP3 encoding both happen on your device.
Which files can I convert?
Drop an .aac or .m4a file in the box, or click it to browse. The box also takes other audio files, because your browser decodes the sound and the tool then encodes it as MP3. Whether a particular file opens depends on what your browser can decode. Once a file loads, a line above the settings shows its name, length, number of channels and sample rate.
Why won't my file open?
If you see “No audio track could be read from this file”, the file may have no sound, or it uses a codec your browser can't decode, so try it in Chrome or Edge, as the message suggests. Files over 1.5 GB are refused before decoding starts. If you're told the MP3 encoder failed to load, refresh the page and try again.
What does Normalise volume do?
It finds the loudest moment in the part you're converting and adjusts the whole clip so that peak sits just below full scale, at 98%. Quiet recordings get louder without clipping, by up to 20 times (about 26 dB), while a nearly silent file is left as it is. When the volume is raised, the finished message shows how many decibels were added.
How long is the fade in and out?
Tick Fade in and out and the volume rises from silence over the first 1.5 seconds, then falls to silence over the last 1.5 seconds of the part you convert. On a clip shorter than six seconds, each fade lasts a quarter of the clip instead. The fades are applied after trimming, so they smooth the start and end times you set.
How big will the MP3 be?
The size depends on the quality setting and the length of the part you convert, not on the size of the original file. For a typical 44.1 or 48 kHz recording, each minute comes to about 0.7 MB at 96 kbps, 1 MB at 128 kbps, 1.4 MB at 192 kbps, 1.9 MB at 256 kbps and 2.4 MB at 320 kbps. When conversion finishes, the message shows the exact length and file size.
Do I need to install anything or sign up?
No. The converter runs in this web page, with no account, sign-up or software to install. When the page loads, your browser fetches the open-source lamejs MP3 encoder; after that, decoding, trimming and encoding all happen on your device. JavaScript needs to be switched on. The finished file keeps your original file name, with .mp3 at the end.