MP3 Cutter
Cut MP3 files online for free — trim songs, podcasts and recordings to the exact part you need by setting a start and end time, add a smooth fade in and out, normalise the volume and save a new MP3. Ideal for ringtones, intros and clips. Runs privately in your browser.
100% private — your audio is converted on your device, never uploaded. Conversion happens on your device; nothing is uploaded.
Your browser decodes the audio and an open-source MP3 encoder (LAME, via lamejs) converts it on your device — nothing is uploaded. Works with MP4, MOV, M4A, WebM, MKV, WAV, OGG and more; very long files need plenty of memory, so trim if your browser struggles.
How to cut an MP3
- Drop your MP3 in the box.
- Type the start and end times (minutes:seconds).
- Tick Fade in and out for smooth edges, and choose the quality.
- Click Cut and save MP3, listen and download.
What you can use it for
- Make ringtones and alarm sounds
- Cut intros, outros and highlights from podcasts
- Trim silence from voice recordings
- Clip music for videos, stories and presentations
More free tools
Editing images?
Convert, compress, resize and vectorize images with our free, private image tools.
See all free image tools →Frequently asked questions
How do I cut part of an MP3?
Drop the MP3 in, enter the start and end times (for example 0:45 and 1:15), and click Cut and save MP3.
How do I make a ringtone?
Cut a 20–30 second section, tick Fade in and out, and save. iPhones need the M4R format via GarageBand or iTunes; most Android phones accept MP3 directly.
Can I cut WAV, M4A or video files too?
Yes — any audio or video file your browser can play works, and the result is saved as MP3.
Which quality should I choose?
192 kbps sounds excellent for music and keeps files small; 320 kbps is the highest MP3 quality. For podcasts and speech, 96–128 kbps in mono is plenty.
Can I convert just part of the file?
Yes — set a start and end time (minutes:seconds) before converting. Fade in and out smooths the cut edges.
Is there a file size limit?
There's no upload limit because nothing is uploaded, but the whole file is decoded in your browser's memory. Files up to a few hundred MB work well on most computers; for very long recordings, convert in parts.
Is my file uploaded?
No. Decoding and MP3 encoding both happen on your device.
Is the MP3 cutter free, and can I use the clips commercially?
Yes. It's free, with no account or sign-up, and nothing is added to your audio: the new MP3 holds only the part you chose. You can use your clips in videos, podcasts, ringtones or client projects, personal or commercial, and no credit to us is needed. The rights to the recording itself stay with whoever owns it, so get permission before you publish or sell music or other people's audio.
How do I type the start and end times, and can I cut to a fraction of a second?
Type minutes and seconds, such as 1:15, or hours, minutes and seconds, such as 1:02:30, for long recordings. Plain seconds (75) and decimals (1:15.5) work too, so you can cut to a fraction of a second. The End box is filled in with the full length when your file loads. A time past the end of the file is treated as the end, and the end must be at least 0.1 seconds after the start.
What do Fade in and out and Normalise volume do?
Fade in and out ramps the volume up from silence at the start of your clip and back down to silence at the end, each over 1.5 seconds, or over a quarter of the clip if it's shorter than 6 seconds. Normalise volume sets the level so the loudest moment in the part you keep sits just below the maximum, boosting quiet audio by up to 26 dB. The result message shows how much it was boosted.
How big will the cut MP3 be?
The size depends on the quality setting and the length of the clip. Each minute takes about 0.9 MB at 128 kbps, 1.4 MB at 192 kbps (the default) and 2.3 MB at 320 kbps, so a 30-second ringtone at 192 kbps is roughly 0.7 MB. When the MP3 is ready, the message under the drop box shows its exact length and size, and you can listen to it before downloading.
Why won't my file open or my MP3 save?
If you see “No audio track could be read”, the file has no sound or uses a codec your browser can't decode, so try it in Chrome or Edge. Files over 1.5 GB are refused, so use a shorter clip. If the MP3 encoder fails to load, refresh the page and try again. If it says the end time must be after the start time, leave at least 0.1 seconds between the two.