Mic Test
Test your microphone online for free — see a live level meter and waveform, check peak levels and clipping, switch microphones, compare with noise suppression on or off, and record 5 seconds to hear how you sound. The audio stays on your device; nothing is uploaded.
100% private — nothing is recorded or uploaded. Conversion happens on your device; nothing is uploaded.
The microphone turns on only when you click; the sound is analysed on your device and never uploaded. The 5-second test recording stays in your browser so you can hear how you sound.
How to test your microphone
- Click “Test my microphone”.
- Allow microphone access when your browser asks.
- Speak and watch the level meter and waveform.
- Record 5 seconds and play it back to hear yourself.
What you can use it for
- Check your mic before calls, streams and recordings
- Find the right input level and avoid clipping
- Test a new headset or USB microphone
- Troubleshoot a microphone that isn't picking up sound
More free tools
Designing with text?
Style, caption and decorate text with our free, private text and image tools.
See all free tools →Frequently asked questions
Why isn't my microphone working?
Check the browser permission (the microphone or lock icon in the address bar), make sure the mic isn't muted by a hardware switch or in your system settings, and that the right device is selected in the menu.
What level should my voice be?
Aim for normal speech peaking around −12 to −6 dBFS. If the warning says you're clipping, move back or lower the input volume.
What does noise suppression do?
It's the processing used by video-call apps. Turn it on to hear how you'll sound on a call, or off to hear the raw microphone.
Is my voice recorded or uploaded?
Only the optional 5-second test, which stays in your browser so you can play it back. Nothing is uploaded.
What do the Level, Peak and Sample rate readings show?
Level is the average loudness of the sound right now, in dBFS, where 0 dBFS is full scale, the highest level the signal can reach. It reads “silent” when there is no signal. Peak shows the loudest recent moment and falls back slowly, so short bursts stay visible. Sample rate is the rate, in hertz, of the audio the page is analysing. The readings and your microphone's name refresh four times a second.
What do the meter colours mean?
The bar shows the average level on a scale from −60 dBFS, where it's empty, to 0 dBFS, where it's full. It stays grey below −40 dBFS, when the sound is very quiet. It turns yellow-green from −40 to −20 dBFS, green from −20 to −6 dBFS, and red above −6 dBFS, when the sound is very loud. Speak at your normal volume and watch which colour it reaches.
What do the “No sound detected” and “clipping” messages mean?
“Your microphone is working” appears once the level goes above −50 dBFS. If it hasn't risen above −70 dBFS after 2 seconds, you'll see “No sound detected yet”: speak, check the mic isn't muted and pick the right device. “Your voice is clipping” appears when the waveform has reached the top of the scale more than five times; move back from the mic or lower the input volume.
What do the “blocked”, “not found” and “busy” errors mean?
“Access to your microphone was blocked” means the browser permission was refused: allow the microphone from the icon in the address bar, then try again. “No microphone was found” means the browser can't see an input device, so check it's plugged in and enabled. “Your microphone is busy or unavailable” means another app may be using it: close other call or recording apps, then click Test my microphone again.
How do I test a headset or USB microphone?
Plug it in, then click Test my microphone. The test starts with your browser's default input. If more than one microphone is connected, a menu appears next to the Stop button listing them by name. Choose your headset or USB mic and the test restarts with it straight away. The Microphone reading under the waveform shows which device is being measured.
How does the 5-second test recording work?
While the test is running, click Record 5 seconds. The button counts down from 5, then a player appears below it so you can listen back. The clip uses whatever noise-suppression setting is active at the time. It's kept in your browser's memory, not uploaded, and your next recording replaces it in the player.
Is noise suppression on by default?
No. The box starts unticked, so the first test captures your microphone without the browser's call processing. Ticking it turns on noise suppression, echo cancellation and automatic gain control together, and the test restarts straight away with the new setting. To hear the difference, make a 5-second recording with the box unticked, then another with it ticked.
Do I need to sign up or install anything?
No. The test runs on this page in your browser, with no account or download. The microphone turns on only when you click Test my microphone and allow access when your browser asks. Click Stop to turn it off; it's also switched off when you leave the page. The sound is analysed on your device and never sent anywhere.