Rack Card Size (4 × 9 in) + Blank Template
The rack card size most printers call standard is 4 × 9 inches, portrait (1200 × 2700 px at 300 DPI). With a 1/8 in bleed on every side the print file is 4.25 × 9.25 in (1275 × 2775 px), and text is kept inside a 3.75 × 8.75 in safe area. A slimmer 3.5 × 8.5 in card is the other common size, and one printer also lists an extra-tall 4.25 × 11 in card. Pick a size below, or type your own in inches or millimetres, to see it with and without bleed in inches, millimetres, points and pixels at any DPI, then download a blank template with bleed, safe area and a top-third guide as a true-size PDF, SVG or PNG. Free, with nothing uploaded.
100% private — everything runs in your browser. Everything runs in your browser; nothing is uploaded.
The PDF and SVG are vector and true to size; print at 100% (actual size). The PNG carries the DPI so design apps open it at the right size. The guides are for your design; delete them before you send the file.
Size
Print setup
Bleed is added on each side. Print vendors differ, so use the bleed yours asks for: tap a size or type any value in the Bleed box. Safe margin uses the same units; DPI is pixels per inch. Your printer’s template wins if its numbers differ.
Runs entirely in your browser with our own size, PDF, SVG and PNG code: nothing is uploaded or saved, and once the page has loaded it keeps working with no internet connection. You may use what you make here, including commercially, with no credit needed.
How to get a rack card size and template
- Pick 4 × 9 (standard), 3.5 × 8.5 (slim) or 4.25 × 11 (extra tall), or type your own size in inches or millimetres; portrait is the default, as rack cards stand in their pockets.
- Set the bleed your print vendor asks for (tap None, 1/16, 1/8 or 1/4 in, or 2, 3 or 5 mm in millimetres, or type any value), then the safe margin (1/8 in is the default) and the DPI you need for pixel sizes and the PNG.
- Leave Mark the top third ticked to see the part of the card that usually shows above a rack pocket.
- Read the trim, file (with bleed) and safe-area sizes in the table under the preview.
- Download the blank template as a PDF or SVG (vector, true to size) or as a PNG at your DPI, and design on top of it.
What you can use it for
- Set up a 4 × 9 in rack card file with bleed for a print shop
- Get the pixel size for a rack card design at 300 or 600 DPI
- Check where text must stay so it is not trimmed
- Plan a headline that shows above a brochure-rack pocket
- Compare 4 × 9, 3.5 × 8.5 and 4.25 × 11 in cards side by side
- Make a blank guide for a hotel, tourism or clinic rack card
Rack card size chart
| Size | Trim (inches) | Trim (mm) | File with 1/8 in bleed | Safe area (1/8 in margin) | Where we found it |
|---|---|---|---|---|---|
| 4 × 9 in (standard) | 4 × 9 in | 101.6 × 228.6 mm | 4.25 × 9.25 in | 3.75 × 8.75 in | Two printers’ guides |
| 3.5 × 8.5 in (slim) | 3.5 × 8.5 in | 88.9 × 215.9 mm | 3.75 × 8.75 in | 3.25 × 8.25 in | Two printers’ guides |
| 4.25 × 11 in (extra tall) | 4.25 × 11 in | 107.95 × 279.4 mm | 4.5 × 11.25 in | 4 × 10.75 in | One printer’s guide |
Sizes are portrait (width × height), as rack cards stand. Printers differ: if yours gives other numbers, type them into the tool.
Rack card sizes in pixels
| Size | 150 DPI | 300 DPI | 300 DPI with bleed | 600 DPI | 600 DPI with bleed |
|---|---|---|---|---|---|
| 4 × 9 in | 600 × 1350 px | 1200 × 2700 px | 1275 × 2775 px | 2400 × 5400 px | 2550 × 5550 px |
| 3.5 × 8.5 in | 525 × 1275 px | 1050 × 2550 px | 1125 × 2625 px | 2100 × 5100 px | 2250 × 5250 px |
| 4.25 × 11 in | 638 × 1650 px | 1275 × 3300 px | 1350 × 3375 px | 2550 × 6600 px | 2700 × 6750 px |
Pixels = inches × DPI, rounded. 300 DPI is the usual minimum for print; set any DPI from 72 to 2,400 in the tool.
Bleed, trim and safe area
| Line | What it means | 4 × 9 in card |
|---|---|---|
| Bleed | Colour and photos run past the edge so no white shows after cutting | 1/8 in on every side: file 4.25 × 9.25 in |
| Trim | Where the card is cut | 4 × 9 in |
| Safe area | Keep text and logos inside it | 3.75 × 8.75 in with a 1/8 in margin |
| Top third | The part that usually shows above a rack pocket | the top 3 in of the card |
To add bleed and crop marks to a finished design, use Bleed and Crop Marks; to turn any print size into pixels, Print Size to Pixels.
Mailing a rack card (USPS size check)
| Size | USPS class by size (0.012 in thick) | Note |
|---|---|---|
| 4 × 9 in | Letter price (charged as a letter) | Inside the letter aspect ratio (1.3 to 2.5) |
| 3.5 × 8.5 in | Letter price (charged as a letter) | Inside the letter aspect ratio (1.3 to 2.5) |
| 4.25 × 11 in | Letter price (charged as a letter) | Aspect ratio 2.59 is outside 1.3 to 2.5: USPS counts letter-size mail like this as nonmachinable (DMM 101 1.2.1), which costs more. |
Worked out with the same USPS size limits as our postcard size tool (Domestic Mail Manual 101). Weight and price are not checked.
What downloads
| Download | What is in it |
|---|---|
| One vector page at the size with bleed, true to size, with the trim box set; bleed tint, trim, safe area, top-third guide and a size label you can switch off | |
| SVG | The same lines in named layers (BLEED, TRIM, SAFE-AREA, TOP-THIRD, LABELS) at physical size, for vector apps |
| PNG | The template at your DPI, with the DPI written into the file |
Which tool to use
| You want | Use |
|---|---|
| Rack card sizes and a blank template | Rack Card Size (this page) |
| Flyer and brochure sizes and fold panels | Flyer Sizes |
| To design and print a flyer | Flyer Maker |
| A folded brochure | Brochure Maker |
| A card that hangs on a door handle | Door Hanger Template |
| Business card or postcard sizes | Business Card Size, Postcard Size |
| Poster sizes | Poster Sizes |
For other print sizes, see Flyer Sizes, Poster Sizes, Business Card Size and Postcard Size. To design the card itself, try the Flyer Maker or, for a folded piece, the Brochure Maker; for a card with a hanger hole, the Door Hanger Template.
Sources
Read on 22 November 2026: a large online printer’s rack card size guide (published 21 July 2026: 4 × 9 in standard, 3.5 × 8.5 in slim and 4.25 × 11 in extra tall, each with its bleed and text-safe size, 0.125 in bleed and safe margin, and the top-third advice); another large printer’s rack card sizes article (14 April 2025: 4 × 9 and 3.5 × 8.5 in as the two most common sizes); and a third printer’s 4 × 9 in template PDF (4.25 × 9.25 in page with the trim box 1/8 in inside). USPS size limits as read for our postcard size tool (21 November 2026).
More free tools
Designing something to print?
Cards, flyers, posters and paper sizes: free print tools that run privately in your browser, with no sign-up and no watermark.
See all free tools →Frequently asked questions
What is the standard rack card size?
Most printers call 4 × 9 in (101.6 × 228.6 mm) the standard rack card size, used portrait and printed on both sides. The other common size is a slimmer 3.5 × 8.5 in; check the pocket of the rack you plan to use.
What size is a rack card with bleed?
With 1/8 in (0.125 in) bleed on every side, a 4 × 9 in card is a 4.25 × 9.25 in file, a 3.5 × 8.5 in card is 3.75 × 8.75 in and a 4.25 × 11 in card is 4.5 × 11.25 in. Extend any colour or photo that touches an edge into the bleed.
How much bleed does a rack card need?
It depends on the print vendor. 1/8 in (0.125 in, about 3 mm) on every side is the usual default and ours, but some printers ask for less or more, so check their spec sheet or template. Tap the matching bleed above the preview, or type your own; the file size, pixels and template all update.
What is the safe area on a 4 × 9 rack card?
With a 1/8 in safe margin it is 3.75 × 8.75 in. Keep text, logos and anything that must not be trimmed inside it; give the headline extra room at the top if the rack has a lip.
What size is a rack card in pixels?
At 300 DPI, 4 × 9 in is 1200 × 2700 px (1275 × 2775 px with bleed); at 600 DPI it is 2400 × 5400 px (2550 × 5550 px with bleed). A 3.5 × 8.5 in card is 1050 × 2550 px at 300 DPI.
What size is a slim rack card?
3.5 × 8.5 in (88.9 × 215.9 mm). With 1/8 in bleed the file is 3.75 × 8.75 in and the safe area 3.25 × 8.25 in; at 300 DPI the card is 1050 × 2550 px.
Why mark the top third?
A rack card stands in a pocket that hides its lower part, so a printer’s rack card guide advises putting the headline, logo and main message in the top third, which is what people see in the rack. The guide line sits exactly a third of the way down the trim; the real pocket height depends on the rack.
Is a rack card the same as a door hanger?
Door hangers often use the same widths (4.25 × 11, 4 × 9 or 3.5 × 8.5 in), but they have a hole and a slit to hang on a handle. For that shape, use the Door Hanger Template.
Can I mail a rack card?
By size, a 4 × 9 in or 3.5 × 8.5 in card is letter-size mail for USPS (bigger than the 4.25 × 6 in postcard limit, inside the 6.125 × 11.5 in letter limit) and must be at least 0.009 in thick. A 4.25 × 11 in card is letter-size too, but its length is 2.59 times its height, outside the 1.3 to 2.5 range USPS counts as machinable, so it costs more. We check size only, not weight or price.
What file should I send the printer?
Usually a PDF at the size with bleed (for 4 × 9 in, 4.25 × 9.25 in) in the colours the printer asks for. Our template PDF already has the trim box set inside the bleed. Always use your printer’s own template numbers if they differ.
Is it free, and is anything uploaded?
Yes, it is free, with no sign-up and no watermark. Nothing is uploaded: the sizes are worked out and the PDF, SVG and PNG are made in your browser, and once the page has loaded it keeps working with no internet connection.