, ,

Apertura Brand Guidelines: Christian Yvon’s Curved-Cabinet Loudspeakers From Near Nantes

·

Brand Guidelines · Field Guide

Apertura Brand Guidelines

Christian Yvon’s curved-cabinet loudspeakers from near Nantes.

FIG 7.0 — CURVED CABINET (ABSTRACT HOMAGE)

FIG 7.1 — SOFT SERIF
Aa

Two constants: an Apertura cherry, ink and ivory palette and a Soft serif register. Abstract homage — not an Apertura product or mark; no loudspeaker, logo or nameplate is reproduced.

Founded
France1983 (company’s dating)
Designer
Christian Yvon
Known for
DRIM crossover, Enigma mkII, Kalibrator
Today
Stentor SAS, Puceul, near Nantes
01

From DRIM to Apertura

A loudspeaker brand built around one designer.

Apertura is a loudspeaker brand from western France, built around the work of the designer Christian Yvon. The company dates the brand to 1983: its website said in 2018 that the year marked “the 35 years of the Apertura brand” and now speaks of “40 years” of making speakers and cables, and the online magazine 6moons wrote in 2019 that Yvon “previously worked at Goldmund, then launched his first Apertura model in 1983.” An archived 2011 version of the website said “nearly twenty years,” which would point to the early 1990s, so the brand’s own dating has varied.

Yvon’s career began with crossovers. Apertura’s 2021 brochure credits him with creating the DRIM crossover topology in 1978, and its 2011 website called him “the father” of the technology, which combines slopes of 6, 12 and 24 dB per octave to keep each driver within a sharply defined band while controlling phase. The brochure says he worked as a designer and consultant to well-known European high-end brands, including “the creation of Goldmund’s speaker line” and work with Focal and Sonus faber. The critic Roy Gregory, writing on Gy8 in 2021, confirmed part of that record: speaker designs for the Swiss company Goldmund, “the Apologue and Epilogue,” and “a spell at JMLabs,” the name long used by Focal for its hi-fi speakers.

The current company is younger than the brand. Apertura’s brochure says Yvon’s goal of controlling every aspect of design was “finally realised” in 2010 “with the establishment of Stentor SAS, in partnership with Eric Poyer, a mechanical and production engineer with over twenty years experience in the audio industry.” The French company register confirms that Stentor, a simplified joint-stock company (SAS), was created on 18 March 2010, with Eric Poyer as president and Christian Yvon as managing director. We found no record, in the sources checked, of the company that sold Apertura speakers before 2010.

02

Colour

Two-way speakers, curved walls, one spike.

Apertura’s design rules are consistent and unusual. Yvon builds two-way speakers only: “We prefer two-way architectures compared to which three-ways are far more complicated and costly,” he told 6moons in a 2015 review of the Adamante, a speaker with two bass-midrange drivers either side of its tweeter. Most models pair large ribbon tweeters with polypropylene bass-midrange drivers, joined by the DRIM crossover. The company says each pair’s drivers are measured and matched and that the crossover is tuned to the specific drivers it will be paired with; in 2011 its website said drivers that did not match its references were rejected.

The cabinets are just as distinctive. The brochure describes curved, asymmetrical walls made from thin layers bonded and moulded under high pressure, rather than flat machined panels, with lapped joints, internal bracing and a proprietary damping material, and argues that the curves are about stiffness rather than, as is often claimed, preventing standing waves. Instead of three or four spikes, the larger models stand on a single grounding spike at the centre of gravity, with adjustable outriggers for stability, a principle the brochure says Yvon “first developed at Goldmund.” The brochure’s title sums up the approach: “different by design.”

The company also makes a claim about craft. Its brochure says “constructing each product is the work of a single individual and the final testing of every product is carried out by the same person that production engineered the design.” In 2019 6moons described Apertura’s 900-square-metre facility close to Nantes. The pages of its website that we checked carry no made-in-France statement, so we report its workshop and its account of how the speakers are built, and no more.

Copy
Cherry
#5C2A1E
Copy
Ink
#1A0E0A
Copy
Ivory
#F2EADF
Copy
Satin veneer
#B5835A
Copy
Paper
#FAF6F0
03

Typography

The French hi-fi scene.

Beyond France’s best-known hi-fi names, a set of smaller makers has grown up in the regions, often around a single founder or family. Their records are uneven: some can be traced through trade reviews and France’s company register, others mainly through their own websites.

Two of the digital-source makers in this guide grew up near Toulouse, a centre of the aircraft industry. In 2000 Audio Aero gave an address at Cornebarrieu, beside Toulouse-Blagnac airport, and described itself as the audio division of an aerospace subcontractor; Metronome Technologie is registered at Montans, in the Tarn, according to France’s company register.

The loudspeaker makers are spread more widely. Jean-Marie Reynaud says its brand was founded in 1967 at Barbezieux, in Charente, and that the founder’s son, Jean-Claude Reynaud, has run it alone since his father’s death in 2011. Atohm gives an address at Pin, in Haute-Saône, under the name Welcohm Technology, and Apertura describes itself as a brand of Stentor SAS at Puceul, north of Nantes.

Valve amplification has its own small workshops. Audiomat says it was founded in 1986 by the brothers Denis and Norbert Clarisse, and that its first amplifier used sixteen 6AS7G triodes; the company is registered at La Destrousse, near Marseille. Lavardin Technologies, which makes amplifiers, spent 25 years at Fondettes, near Tours, before registering a new office in Tours itself in late 2025, according to the company register.

This guide sets out what can be checked about each brand — who founded it, who owns it, and what it says about where its products are made — and marks clearly what rests only on the company’s own word.

Aa

A soft serif — for a brand of curved, lacquered cabinets. (Specimen set in Fraunces, a serif STAND-IN; NOT the Apertura logo.)

Soft serif · the registerApertura cherry, ink and ivory · the paletteChristian Yvon’s curved-cabinet loudspeakers from near Nantes · the signature

04

Puceul

From Héric to Puceul, and on to Vienna.

The register traces the company’s moves in the countryside north of Nantes. Stentor’s first establishment, at Héric, opened with the company in 2010 and closed in May 2021; since March 2015 its registered office has been on a business park at Puceul, the address the website gives today for “a brand of Stentor SAS.” The register classes the company under specialised design activities and, for 2024, lists a staff of three to five.

The range runs from the compact Prélude Mini and Swing through the Sensa, Stela, Armonia Evolution, Edena Evolution, Forté and Adamante to the flagship Enigma mkII, which has two 22 cm drivers and a large ribbon tweeter. Older names include the Tanagra Signature, Variation, Ariana, Onira and the Kalibrator, a stand-mount released just before 2000 that the company says won several press awards. A new Kalibrator Evo had what the company called its world premiere at the High End show in Vienna in June 2026. The Forté, launched in 2023, is designed for low-powered valve and Class A amplifiers, the company says.

Recognition has come mainly from the specialist press. According to Apertura’s archived 2011 website, Diapason gave the Armonia a Diapason d’Or in September 2011; the company says the Stela received another in 2024 and that The Absolute Sound gave the Enigma mkII an Editor’s Choice Award for 2022, after a 2021 review that called it “an outstanding value.” In Germany, Hifistatement described Apertura in 2020 as a “Traditionsmarke,” an established name, and noted how rarely respected French speakers are seen there.

For a design guide, Apertura shows how a single designer’s rules — two ways, curved walls, one spike — can become a visual identity. Compare Cabasse and Triangle, two other French loudspeaker makers. For this guide we use deep cherry, ink and a pale ivory with a serif, an unofficial interpretation; no product or logo is reproduced.

05

Explore & save

Keep Apertura’s identity on hand — save it to a board in the Made Good inspiration library.

Apertura identity set

Pin the Apertura cherry, ink and ivory palette and the Soft serif register to your own board.

Core Palette
Homage
Aa
Soft serif
The register
Soft serif
Gradient

♡ Save to a board

06

Source & notes

Sources: French company register (Sirene data via recherche-entreprises.api.gouv.fr, accessed October 2026); Apertura (apertura-audio.com, accessed 2026, its 2021 brochure and an archived 2011 version via the Internet Archive); 6moons (2015, 2019); Roy Gregory, Gy8 (2021); Hifistatement (2020). No official brand hex is published, so the tones here are an unofficial interpretation, and no product or mark is reproduced.