,

Bollinger+Grohmann Brand Guidelines: The Frankfurt Structural Engineers Founded in 1983

·

Brand Guidelines · Field Guide

Bollinger+Grohmann Brand Guidelines

The Frankfurt engineers who started at a kitchen table.

FIG 7.0 — GRIDSHELL LINES (ABSTRACT HOMAGE)

FIG 7.1 — TECHNICAL SANS
Aa

Two constants: a brick red, umber and plaster white palette and a technical sans register. Abstract homage — not a Bollinger+Grohmann drawing or mark; no project image, logo or wordmark is reproduced.

Founded
Darmstadt, then Frankfurt, Germany1983
Founders
Klaus Bollinger, Manfred Grohmann
Known for
BMW Welt, Rolex Learning Center, Louvre-Lens
Today
Bollinger + Grohmann Holding AG, Frankfurt
01

Two students from Darmstadt

A practice that began at a kitchen table.

Bollinger+Grohmann was founded in 1983 by two civil engineers, Klaus Bollinger and Manfred Grohmann. A profile published by TU Darmstadt in October 2022 says the two began studying civil engineering at what was then the Technische Hochschule Darmstadt in October 1972, met in their third semester and graduated together. After their degrees, Bollinger worked at the engineering firm Krebs+Kiefer and Grohmann in the technical office of the contractor Wayss & Freytag.

The office itself started small. “We started at the kitchen table,” Bollinger told the university; the practice then moved into a three-room flat in Darmstadt before relocating to Frankfurt am Main. Early commissions included school extensions, day-care centres and housing in Frankfurt. German Wikipedia adds that a design by Bollinger for a suspended roof, never built, caught the eye of the architect Peter Cook, who brought him to teach at the Städelschule in Frankfurt.

Both founders kept academic careers alongside the firm. Bollinger was an assistant to Stefan Polónyi in Dortmund from 1981, took his doctorate there in 1984, and became professor of structural design at the University of Applied Arts Vienna in 1994, where, the 2022 profile says, he taught for 27 years. Grohmann became professor of structural design in the architecture faculty of the University of Kassel in 1996. Grohmann also taught at TU Darmstadt, the Städelschule and the École Spéciale d’Architecture in Paris, has sat on the executive council of the International Association for Shell and Spatial Structures since 2010 and holds honorary professorships at the universities of Nottingham and Melbourne, the profile adds. Bollinger taught at the Städelschule until 2021. German Wikipedia describes the firm’s approach as closely integrated with architecture in the tradition of Polónyi, while keeping the engineers in the background, and notes that it has its own department for advanced geometry.

02

Colour

Engineering for sculptural buildings.

The firm’s reputation rests on long collaborations with architects. German Wikipedia credits it with BMW Welt in Munich, designed by Coop Himmelb(l)au; the Rolex Learning Center and Louvre-Lens, both designed by SANAA; and the extension of the Städel Museum in Frankfurt, designed by schneider+schumacher, whose underground garden hall the TU Darmstadt profile also names. The same profile says the firm worked with Coop Himmelb(l)au, SANAA and Zaha Hadid on many projects, and that its fields cover structural engineering, façade planning, building physics and work with existing buildings.

In 2013 the Deutsches Architekturmuseum in Frankfurt held an exhibition of the firm’s work, German Wikipedia says, and the publisher Detail issued a monograph on the practice the same year. An earlier book, Workflow: Struktur – Architektur, edited by Peter Cachola Schmal, appeared from Birkhäuser in 2004. Bollinger’s own books include the Atlas moderner Stahlbau of 2011 and Stressing Wachsmann, edited with Florian Medicus and published by Birkhäuser in 2020, and colleagues marked his career with a Birkhäuser festschrift, Realisierte Visionen, in 2021.

For designers, the firm’s presentation is instructive. Its website leads with credited photographs of finished buildings, and its pages are grouped under Office, Projects and Expertise. The name joins the two founders with a plus sign, a device the firm uses consistently, alongside the short form B+G for internal programmes such as its B+G Academy. The plus sign and the two surnames carry the identity.

Copy
Brick red
#7A3B2E
Copy
Riverside umber
#241A17
Copy
Sandstone
#C9B8A6
Copy
Plaster white
#F1EDE8
Copy
Paper
#F8F7F5
03

Typography

Design and documentation.

Structural and façade engineering consultancies rarely sell a product, so their identity rests on a name and a record. Many carry the surnames of founders or partners, sometimes joined by a plus sign or an ampersand, sometimes run together in lower case, and many shorten to initials in everyday use. The wordmark is usually typographic rather than pictorial: a plain sans or a restrained serif, set on a quiet background, with one accent colour at most.

The work itself does most of the talking. Websites, brochures and monographs lead with project photography of bridges, stadium roofs, glass façades, towers and temporary pavilions, often shot at dusk or from below to show cables, members and joints. Alongside the photographs come drawings, sections, physical and digital models and construction sequences, and the projects are credited together with the architects and builders who worked on them, since an engineer’s name rarely appears on a building alone.

Writing about these firms tends to follow the same pattern. Founders and partners are described in their professional roles, with dates for when they joined or took over; ownership is set out plainly, whether a partnership, a firm owned by its employees or a practice absorbed into a larger group; and renamings and mergers are dated. History pages trace a practice back through earlier names, and office pages list the cities where teams are based, often with the year each office opened.

This guide follows that approach. It sets out what dated sources say about each firm: who founded it, how its name and ownership changed, where it works and which projects independent publications credit to it. It describes what was engineered rather than what it achieves, and it treats the palette and typefaces shown here as an unofficial interpretation, not the firms’ own identity.

Aa

A technical sans for a practice named with a plus sign. (Specimen set in IBM Plex Sans, a sans STAND-IN; NOT the Bollinger+Grohmann logo or wordmark.)

Technical sans · the registerBrick red, umber and plaster white · the paletteThe Frankfurt engineers who started at a kitchen table · the signature

04

Bollinger + Grohmann Holding

From two founders to a partnership of offices.

The practice grew office by office. German Wikipedia dates branches in Vienna (2003), Paris (2006), Melbourne and Oslo (both 2010) and Berlin (2013). The TU Darmstadt profile of October 2022 counted about 400 staff in 17 branches, with more than 120 engineers in Frankfurt alone, in the round, glazed Westhafen tower overlooking the Main. In November 2026 the company says it has 19 offices in ten countries; its team pages list branches including Berlin, Brussels, Budapest, Copenhagen, Melbourne, Munich, Nantes, Oslo, Paris, Rome, Stuttgart and Vienna. Its disciplines, it says, are structural engineering, façade engineering, building physics and fire engineering.

Ownership has changed in stages. The 2022 profile says the founders converted the firm into a holding in 2010 and in 2020 handed the company to their partners while keeping a majority. In February 2022 the law firm ADVANT Beiten announced that it had advised Bollinger + Grohmann Holding AG on a transaction integrating the engineering office Greiner, with three German locations and foreign holdings, into the group; Greiner was to trade as B+G Greiner GmbH, and its Budapest office kept its existing Hungarian company name.

The identity has stayed consistent through that growth: the two surnames, the plus sign and the abbreviation B+G, used across offices that each work under the same name. The team pages sort staff by discipline, from structural and façade engineering to building physics, fire engineering, timber engineering, design technology and BIM, which gives the brand a technical, evenly weighted vocabulary.

A design system drawn from this register would pair warm, masonry-like tones with a clear technical sans, keep the plus sign as the one graphic device, and let large, credited photographs of finished buildings carry the visual weight, with short factual captions beside them.

For a design guide, Bollinger+Grohmann shows how a partnership name and a single typographic device can hold together a firm spread across many cities. Compare Werner Sobek, another German engineering practice with offices abroad, and Zaha Hadid Architects, one of the practices it has worked with. For this guide we use brick red, umber, sandstone and plaster white with a sans, an unofficial interpretation; no product or logo is reproduced.

05

Explore & save

Keep Bollinger+Grohmann’s identity on hand — save it to a board in the Made Good inspiration library.

Bollinger+Grohmann identity set

Pin the brick red, umber and plaster white palette and the technical sans register to your own board.

Core Palette
Homage
Aa
Technical sans
The register
Technical sans
Gradient

♡ Save to a board

06

Source & notes

Sources: TU Darmstadt (“Am Küchentisch angefangen,” October 2022); German Wikipedia (Klaus Bollinger); ADVANT Beiten (February 2022); Bollinger+Grohmann (bollinger-grohmann.com, 2026). No official brand hex is used here: the tones are an unofficial interpretation, and no product or mark is reproduced.
07

Frequently Asked Questions

What font can I use to match the Bollinger+Grohmann look?

This guide describes Bollinger+Grohmann’s type as “A technical sans for a practice named with a plus sign”. Its type specimen is set in IBM Plex Sans from Google Fonts as a stand-in; IBM Plex Sans is not Bollinger+Grohmann’s own lettering.

What colours are in the Bollinger+Grohmann palette?

This guide’s Bollinger+Grohmann palette is Brick red #7A3B2E, Riverside umber #241A17, Sandstone #C9B8A6, Plaster white #F1EDE8 and Paper #F8F7F5. The tones are the guide’s own unofficial interpretation, not official Bollinger+Grohmann hex codes.

When was Bollinger+Grohmann founded?

Bollinger+Grohmann was founded in 1983, in Darmstadt, then Frankfurt, Germany.

Who founded Bollinger+Grohmann?

Bollinger+Grohmann was founded by Klaus Bollinger and Manfred Grohmann in 1983.