Playing Card Size (Poker, Bridge and Tarot) + Template

Most playing cards come in two sizes: poker size, 2.5 × 3.5 inches (63.5 × 88.9 mm), and the narrower bridge size, 2.25 × 3.5 inches (57.15 × 88.9 mm). Tarot cards are usually 2.75 × 4.75 inches. With a 1/8 in bleed a poker card’s print file is 2.75 × 3.75 in (825 × 1125 px at 300 DPI), and text stays inside a 2.25 × 3.25 in safe area. Pick poker, bridge, tarot, mini, jumbo or square below, or type your own size, set the bleed and corner radius, and download a blank template as a true-size PDF, SVG or PNG. Free, with nothing uploaded.

100% private — everything runs in your browser. Everything runs in your browser; nothing is uploaded.

100% private — runs in your browser
BleedTrimSafe areaRounded corner cut

The PDF and SVG are vector and true to size; print at 100% (actual size). The PNG carries the DPI so design apps open it at the right size. The guides are for your design; delete them before you send the file.

Size

Print setup

Bleed:

Bleed is added on each side. Printers differ, so use the bleed yours asks for: tap a size or type any value. Safe margin and corner radius use the same units; DPI is pixels per inch. Your printer’s template wins if its numbers differ.

Runs entirely in your browser with our own size, PDF, SVG and PNG code: nothing is uploaded or saved, and once the page has loaded it keeps working with no internet connection. You may use what you make here, including commercially, with no credit needed.

How to get a playing card size and template

  1. Pick poker, bridge, tarot, mini, jumbo, square or large square, or type your own size in inches or millimetres; portrait is the default.
  2. Set the bleed your printer asks for (tap None, 1/16, 1/8 or 1/4 in, or type any value), the safe margin and the corner radius (1/8 in is common; 0 gives square corners).
  3. Set the DPI you need for pixel sizes and the PNG.
  4. Read the trim, file (with bleed) and safe-area sizes in the table under the preview.
  5. Download the blank template as a PDF or SVG (vector, true to size) or as a PNG at your DPI, and design on top of it.

What you can use it for

  • Set up a custom deck for a print-on-demand card printer
  • Design a tarot or oracle deck at the right size
  • Get pixel sizes for card faces and backs
  • Make a mini deck for travel or a jumbo deck for a classroom
  • Check the safe area so corner numbers are not trimmed
  • Plan a tuck box around the card size

Playing card size chart

SizeTrimTrim (other unit)File with 1/8 in bleedSafe area (1/8 in margin)Where we found it
Poker2.5 × 3.5 in63.5 × 88.9 mm2.75 × 3.75 in2.25 × 3.25 inTwo printers’ guides
Bridge2.25 × 3.5 in57.15 × 88.9 mm2.5 × 3.75 in2 × 3.25 inTwo printers’ guides
Tarot2.75 × 4.75 in69.85 × 120.65 mm3 × 5 in2.5 × 4.5 inTwo printers’ guides
Mini1.75 × 2.5 in44.45 × 63.5 mm2 × 2.75 in1.5 × 2.25 inOne printer’s guide; another lists 1.65 x 2.5 in (42 x 63.5 mm) from another printer
Jumbo3.5 × 5 in88.9 × 127 mm3.75 × 5.25 in3.25 × 4.75 inTwo printers’ guides
Square2.5 × 2.5 in63.5 × 63.5 mm2.75 × 2.75 in2.25 × 2.25 inTwo printers’ guides
Large square3.5 × 3.5 in88.9 × 88.9 mm3.75 × 3.75 in3.25 × 3.25 inOne printer’s guide

Sizes are portrait (width × height). Millimetre figures differ by about 1 mm between makers (poker 63 × 88 or 63.5 × 88.9 mm, bridge 56 × 88 or 57.15 × 88.9 mm); your printer’s template wins.

Playing card sizes in pixels

Size300 DPI300 DPI with bleed600 DPI600 DPI with bleed
Poker, 2.5 × 3.5 in750 × 1050 px825 × 1125 px1500 × 2100 px1650 × 2250 px
Bridge, 2.25 × 3.5 in675 × 1050 px750 × 1125 px1350 × 2100 px1500 × 2250 px
Tarot, 2.75 × 4.75 in825 × 1425 px900 × 1500 px1650 × 2850 px1800 × 3000 px
Mini, 1.75 × 2.5 in525 × 750 px600 × 825 px1050 × 1500 px1200 × 1650 px
Jumbo, 3.5 × 5 in1050 × 1500 px1125 × 1575 px2100 × 3000 px2250 × 3150 px
Square, 2.5 × 2.5 in750 × 750 px825 × 825 px1500 × 1500 px1650 × 1650 px
Large square, 3.5 × 3.5 in1050 × 1050 px1125 × 1125 px2100 × 2100 px2250 × 2250 px

Pixels = inches × DPI, rounded. 300 DPI is the usual minimum for print; set any DPI from 72 to 2,400 in the tool.

Bleed, trim, safe area and corners

LineWhat it meansPoker card (2.5 × 3.5 in)
BleedArt runs past the edge so no white shows after cutting1/8 in on every side: file 2.75 × 3.75 in
TrimWhere the card is cut2.5 × 3.5 in
Safe areaKeep corner numbers and text inside it2.25 × 3.25 in with a 1/8 in margin
Rounded cornersThe corner cut1/8 in radius (set any radius, or 0)

To add bleed and crop marks to a finished design, use Bleed and Crop Marks; to turn any print size into pixels, Print Size to Pixels.

Before you send it to print

CheckWhy
SizeThe trim size matches your printer’s template, in the same orientation
BleedBackgrounds and edge art run to the outer edge of the bleed (1/8 in on each side unless your printer says otherwise)
Safe areaNames, numbers and text sit inside the safe area, clear of the rounded corners
ResolutionImages are at least 300 DPI at the printed size (the pixel table above)
Guides offThe bleed tint, guide lines and size label are deleted or hidden before you export
BacksCard backs line up the same way for every card, and the back design also has bleed

What downloads

DownloadWhat is in it
PDFOne vector page at the size with bleed, true to size, with the trim box set; bleed tint, trim, safe area, rounded-corner cut line and a size label you can switch off
SVGThe same lines in named layers (BLEED, TRIM, SAFE-AREA, ROUNDED-CORNERS, LABELS) at physical size, for vector apps
PNGThe template at your DPI, with the DPI written into the file

Which tool to use

You wantUse
Playing card sizes and a blank templatePlaying Card Size (this page)
To design a full custom deckPlaying Card Template, Deck Designer
Trading card and sleeve sizesTrading Card Size
A tuck box for the deckBox Template
Flash cards or index cardsFlash Card Maker, Index Card Template

To design the deck, try the Playing Card Template or the Deck Designer; for trading cards and sleeves, see Trading Card Size; for a tuck box, the Box Template; for study cards, the Flash Card Maker or the Index Card Template; for a game board, the Board Game Template; for trading card art, the Trading Card Template; for other print sizes, Business Card Size, Postcard Size, Greeting Card Sizes, Rack Card Size and Print Size Calculator.

Sources

Read on 23 November 2026: a printer’s card dimensions page (updated 15 June 2026: poker, bridge, tarot, mini and square sizes, 1/8 in bleed and safe area, 1/8 in corners) and a deck maker and print-on-demand card printer’s size list and templates (poker, bridge, tarot, mini, jumbo and square sizes, 1/8 in bleed plus 1/8 in safe margin, jumbo index on a poker-size card).

More free tools

Designing cards to print?

Card templates, size charts and print checks: free tools that run privately in your browser, with no sign-up and no watermark.

See all free tools →

Frequently asked questions

What size is a standard playing card?

Poker size, 2.5 × 3.5 in (63.5 × 88.9 mm), is the most common. Some makers round it to 63 × 88 mm. Bridge cards are narrower at 2.25 × 3.5 in.

What is the difference between poker and bridge size?

Both are 3.5 in tall. Poker cards are 2.5 in wide; bridge cards are 2.25 in wide, which makes a large hand easier to hold.

What size is a tarot card?

Usually 2.75 × 4.75 in. In millimetres, one printer lists 70 × 120 mm and another 70 × 121 mm, so check your printer’s template. With 1/8 in bleed the file is 3 × 5 in.

What size is a playing card with bleed?

With 1/8 in bleed on every side, poker size is 2.75 × 3.75 in (825 × 1125 px at 300 DPI) and bridge size is 2.5 × 3.75 in (750 × 1125 px).

What size is a playing card in pixels?

At 300 DPI a poker card is 750 × 1050 px and a bridge card 675 × 1050 px; at 600 DPI a poker card is 1500 × 2100 px.

What size are mini and jumbo cards?

Mini decks are 1.75 × 2.5 in from one maker (another lists 1.65 × 2.5 in); jumbo cards are 3.5 × 5 in in two printers’ lists.

Does jumbo index mean a bigger card?

No. Jumbo index means large corner numbers and suits; the card itself is usually standard poker size.

What corner radius do playing cards use?

One printer’s guide calls 1/8 in (about 3 to 3.5 mm) the industry standard. Type a different radius if your printer uses one, or 0 for square corners.

How much bleed does a playing card need?

Most printers ask for 1/8 in (0.125 in, about 3 mm) on every side, plus a further 1/8 in safe margin inside the trim. Check your printer’s template.

What size box fits a deck?

A tuck box is sized from the card plus the deck’s thickness and a little room. Use the Box Template with your card size and deck thickness.

Is it free, and is anything uploaded?

Yes, it is free, with no sign-up and no watermark. Nothing is uploaded: the sizes are worked out and the PDF, SVG and PNG are made in your browser, and once the page has loaded it keeps working with no internet connection.