, ,

Bergmann Brand Guidelines: Johnnie Bergmann’s Air-Bearing Turntables From Denmark

·

Brand Guidelines · Field Guide

Bergmann Brand Guidelines

Johnnie Bergmann’s air-bearing turntables from Denmark.

FIG 7.0 — FLOATING PLATTER (ABSTRACT HOMAGE)

FIG 7.1 — NORDIC SANS
Aa

Two constants: a Bergmann slate, aluminium and fjord blue palette and a Nordic sans register. Abstract homage — not a Bergmann product or mark; no turntable, logo or nameplate is reproduced.

Founded
Denmark2008
Founder
Johnnie Bergmann
Known for
Sindre, Magne, Galder, Odin
Today
Bergmann Audio, Hobro, Denmark
01

Sindre

Drawings put away for a decade.

Bergmann Audio is a Danish maker of air-bearing turntables and linear-tracking air-bearing tonearms, founded and run by Johnnie Bergmann. The company says it was “established in 2008, by Johnnie Bergmann,” and that its first model was the Sindre. Its website already existed in July 2008, when the Internet Archive first captured it.

Bergmann told his story to Hi-Fi News, in a review that the company dates to June 2012. At about ten, he said, he heard the system of his best friend’s father, an audiophile, and felt he “could see them with my ears.” His first pay bought a NAD amplifier, followed by Dali speakers and a Micro Seiki turntable, and the first air-bearing design he heard of was the Forsell. “At the beginning of the 1990s I made the first drawings of my own turntable, where the platter was not only lifted by air but was also centred by air,” he said. Analogue seemed to be dying, so he put the drawings away for 12 or 13 years. He built one deck for himself in “2001 or 2002,” spent six or seven years testing it, and “then in 2008 we went on the market.”

He is, the magazine said, trained as a mechanical engineer, and the biography on his company’s website says the same. It adds that in the 1980s he came to see air bearings as “the most optimal way to build the perfect turntable,” but found the air-bearing designs of the time “problematic and unstable to operate” — drawbacks he set out to remove.

02

Colour

Floating platters with Norse names.

The principle runs through the range. Air is pumped into a tiny gap between a bearing’s surfaces so that they never touch; in Bergmann’s turntables it supports the platter, and in his tonearms it lets the arm glide in a straight line across the record, as the cutting stylus did, rather than swinging in an arc. On the reference Sleipner, the company’s 2011 website said, the platter was “both supported and centered by air.” Reviewing the Sindre for The Absolute Sound in 2010, at $21,000, Paul Seydor described three boxes — turntable, motor controller and air pump — with a carbon-fibre arm tube and a platter of nearly nine pounds of acrylic on a seven-pound aluminium sub-platter, and called it “one of the finest turntables I have ever used,” while criticising its translated manual and the placing of the pump’s switch. Hi-Fi News gave the Magne, at £8,500, its Outstanding Product badge, measured a speed error of just 0.02 per cent, and concluded that “Bergmann’s no-nonsense Nordic design makes some rivals look like fussy contraptions.”

The names come from Norse mythology, and the company says all its products carry them. Seydor noted that Sindri was the dwarf who forged Odin’s golden ring and Thor’s hammer. The current range, according to the website, includes the Galder turntable, which takes up to four tonearms and whose name the company translates as an old Norse word for “magic”; the Modi, named for a son of Thor, which takes two; the fully air-bearing Magne, with its own linear-tracking arm; and the Odin and Thor tonearms, which also fit other makers’ decks. Gold Edition versions of the Galder and the Magne pair a “Black Velvet” finish with 24-carat gold plating. Robb Report, as quoted by the company, wrote in 2020 that the Galder used vacuum hold-down and a 26-pound aluminium platter, or an optional 88-pound copper one.

Copy
Slate
#2E3A40
Copy
Black velvet
#111315
Copy
Brushed aluminium
#BFC4C6
Copy
Fjord blue
#1F4E6B
Copy
Snow
#F5F6F4
03

Typography

Design and documentation.

The seven brands in this group are small. Each makes turntables, tonearms or both, and several are still closely tied to the engineer who designed the first product. Between them they work from seven countries: the United States, Britain, Denmark, Poland, Lithuania, Switzerland and New Zealand.

In Britain, AVID Hifi Ltd has its registered office on an industrial park in Kimbolton, Cambridgeshire, Companies House shows. In Denmark, Bergmann Audio, which makes air-bearing turntables and linear-tracking arms, gives its address as Hobro. J.Sikora lists a street address in Lublin, in eastern Poland.

Reed tonearms come from Tonearms.lt, a Lithuanian company whose address is a village in the Kaunas district. Thales is made by HiFiction AG, which the Swiss commercial register places in Turbenthal, in the canton of Zurich.

Two brands need more care. Spiral Groove’s 2015 press releases were datelined Berkeley, California, but its website returned an error when we checked in October 2026, and its present status is unclear. Well Tempered Lab sells the designs of William Firebaugh. Its website gives a New Zealand phone number and says Opera Audio of Beijing makes the products, and TNT-Audio reported in 2016 that the brand is owned by a New Zealand company.

Small makers often say more about themselves than outsiders can confirm, from founding dates to materials to claims of hand assembly at home. Company registers, dated reviews and press releases settle some of this. The rest is the company’s word.

This guide sets out what can be checked about each brand — who founded it, who owns it, and what it says about where its products are made — and marks clearly what rests only on the company’s own word.

Aa

A clean Nordic sans for a brand that sells simplicity. (Specimen set in Jost, a sans STAND-IN; NOT the Bergmann logo.)

Nordic sans · the registerBergmann slate, aluminium and fjord blue · the paletteJohnnie Bergmann’s air-bearing turntables from Denmark · the signature

04

Bergmann

Designed and made in Jutland.

Bergmann has moved within Jutland. Its 2011 website gave its head office as Karup, in central Jutland; by 2017 the address was Hobro, further north, where it remains. The company says every part of its turntables and arms is designed by Johnnie Bergmann and “manufactured in the Bergmann workshop in Denmark,” and that all its products are “developed, produced and assembled inhouse.” That claim has independent support. Hi-Fi News reported that he makes the parts for his turntables in his own workshop, quoting him as saying, “All the tests and developing and so on, I do by myself.” And in July 2024 Dirk Sommer of the German webzine Hifistatement wrote that a visit to the firm had shown that by far the greater part of the products are made there.

The brand presents itself as Scandinavian design. A page on its website names simplicity, minimalism and functionality, with clean lines and brushed aluminium, and in 2010 Seydor described the Sindre’s “black/silver/white color palette” as “appropriately Danish in its elegant simplicity.” The website presents Bergmann Audio as Johnnie Bergmann’s own company; we could not consult the Danish company register to check its legal ownership.

For a design guide, Bergmann shows how one engineering idea — a platter floating on air — can carry a brand, with names from the sagas doing the storytelling. Compare TechDAS, whose turntables also float their platters on air, and Kuzma, which makes an air-bearing linear-tracking arm of its own. For this guide we use slate, brushed aluminium and a fjord blue with a sans, an unofficial interpretation; no product or logo is reproduced.

05

Explore & save

Keep Bergmann’s identity on hand — save it to a board in the Made Good inspiration library.

Bergmann identity set

Pin the Bergmann slate, aluminium and fjord blue palette and the Nordic sans register to your own board.

Core Palette
Homage
Aa
Nordic sans
The register
Nordic sans
Gradient

♡ Save to a board

06

Source & notes

Sources: Bergmann Audio (bergmannaudio.com, 2026, and archived pages, 2008–2017); Hi-Fi News (Steve Harris and Paul Miller, as reprinted by Bergmann, dated 2012); The Absolute Sound (Paul Seydor, 2010, as reprinted by Bergmann); Hifistatement (Dirk Sommer, July 2024); Robb Report (2020, as quoted by Bergmann). No official brand hex is published, so the tones here are an unofficial interpretation, and no product or mark is reproduced.