Wunder Audio Brand Guidelines
Mike Castoro’s Austin workshop of vintage-style microphones and consoles.
Aa
Two constants: a Wunder Audio gold, oak and gray palette and a studio-classic serif register. Abstract homage — not a Wunder Audio product or mark; no microphone, console or logo is reproduced.
From Stardog to Wunder
A studio owner and gear broker in the hills of Austin.
Wunder Audio is the company of Mike Castoro, and it is based in Austin, Texas. Tape Op’s 2007 interview with him, by Mike Jasper, says Castoro earned a degree in recording engineering at the University of Texas, then opened Stardog Studio, which grew from a four-track room into a 24-track analogue studio, and became a broker of vintage equipment through a business called Misty Hill Audio. In the late 1990s, the interview says, he began making his own equipment under the Wunder Audio name, in “the northern hills of Austin.” We found no exact founding year in the sources we checked, so we give the decade.
One clarification. Wunder Audio is a separate business from Chandler Limited, the Iowa maker of vintage-inspired studio equipment founded by Wade Goeke; Tape Op describes Goeke as Chandler’s founder, and we found no link between him and Wunder Audio.
The first Wunder product to draw wide notice was a preamp, not a microphone. Tape Op reviewed the PEQ1 in its May/June 2004 issue, crediting “Mike Castoro and the gang at Wunder Audio in Austin, TX.” The reviewer, Garrett Haines, wrote that it was “inspired by a one-of-a-kind console built in 1970 for John Paul Jones (of Led Zeppelin fame),” with custom transformers wound “by the same craftsman who wound the original Zeppelin modules.” Mix, in a review by Michael Cooper, dates Jones’s order to 1971 and says Castoro spent four years and made 20 modifications to a module from that console before the PEQ1 was finished. Both describe a discrete, Class A preamp and equaliser listed at $2,250; Mix added that it fits the same slot as a Neve 1073 module.
Colour
Rebuilding the classic German microphones.
Microphones followed. The CM7, reviewed by Mike Jasper in Tape Op in May/June 2007, is based on the Neumann U 47: it uses a “Berlin” M 7-style capsule with a six-micron Mylar diaphragm and three isolator rims rather than two, an EF14 valve, with a VF14 as an option, and a transformer modelled on the “large badge” U 47. It listed at $5,495, and Jasper wrote that it had an “air and clarity that’s missing from the original U 47.” The magazine called Castoro the microphone’s “owner and creator.”
Others came in the same vein. Tape Op reviewed the solid-state CM7 FET, after the Neumann U 47 fet, at $1,995 in 2010, noting that its transformers and circuit differ from the original, and the CM67, after the U 67, at $4,295 in 2013, with a K67 capsule, a vintage Telefunken EF 86 valve and a transformer designed to roll off the high frequencies. The current range adds the CM49, CM50 and CM12 and a model the company names ELA M 251 after the original 1960 microphone it says it follows; most are now sold in “Suprema” versions, which the company says it introduced in July 2016.
The company is specific about parts. It says the brass backplates of its M 7 capsules are “precision milled by hand in Switzerland,” that the capsules are then sent to Germany to be coated in gold, that it uses new-old-stock Telefunken valves and German-made Mundorf capacitors, and that its ELA M 251 uses a Hiller T14/1 transformer and General Electric 6072A valves from a carton made for an aerospace company. These are the company’s own claims. It also upgrades older Wunder microphones, and other makers’ classic microphones, to its current specification.
Typography
Who builds the microphone.
The United States has microphone makers at every price. At one end are small workshops that build by hand or recreate classic studio designs; at the other are brands selling inexpensive microphones to home studios and podcasters. The seven makers here cover that range, spread across the country.
Two are small workshops in the West and South. Ear Trumpet Labs says it was founded in Portland, Oregon, by Philip Graham, a former software engineer, and that its microphones are handbuilt in Oregon. Wunder Audio says its showroom, the Wunderbar Room, is in Austin, Texas.
Two revive vintage designs in the East. Peluso Microphone Lab says John Peluso founded it in 2002 after decades of repairing vintage microphones, and calls FloydFest, held near Floyd, Virginia, its local festival. Telefunken Elektroakustik, founded in 2001, says it assembles its microphones in South Windsor, Connecticut, under the name of the German radio company Telefunken.
Three are larger brands. CAD Audio grew out of Astatic, the Ohio microphone maker founded in the 1930s, which formed CAD as a division in 1988, according to English Wikipedia; its website now gives an address in Berlin, Connecticut, and names JAM Industries USA in its footer. MXL is a brand of Marshall Electronics, which gives its headquarters as Torrance, California. Samson, with a mailing address in Hicksville, New York, says it began with wireless systems in 1980.
This guide sets out what can be checked about each brand — who founded it, who owns it, and what it says about where its products are made — and marks clearly what rests only on the company’s own word.
Aa
A classic book serif for a maker of hardwood-trimmed studio gear. (Specimen set in Cormorant Garamond, a serif STAND-IN; NOT the Wunder Audio logo.)
Wunder Audio
The Wunderbar and the Wunderbar Room.
The company’s largest product is the Wunderbar, an analogue recording console; a video of it at the AES convention in 2006 is online. Wunder Audio builds it to order in 12-channel steps from 12 to 60 channels, or as the “Super D” in eight-channel steps, with a discrete, transformer-balanced signal path and a stereo bus it calls the Wunderbahn, offering three amplifier choices — “Wunder, 1272, and the 312” — which it describes as a world first for a console as standard. The trim is solid hardwood — oak, walnut or birch — with a leather armrest and an optional “Tuxedo Gray” finish. The company says “over a dozen specialists,” from cable builders and machinists to cabinetmakers, work on each desk. In 2026 the retailer Vintage King listed a 60-channel Wunderbar at $214,000.
Customers can hear the gear in the Wunderbar Room, the company’s showroom in Austin, which it describes as having a 30-foot hammer-beam ceiling and carved oak panels bearing Beatles lyrics in Latin; visits are by appointment. We found no record of an outside owner in the sources we checked. The company does not say on the pages we read where its products are assembled, so we say only that it is based in Austin and give its parts claims as its own. Its client list, which includes Abbey Road and AIR Studios, is likewise the company’s.
For a design guide, Wunder Audio shows how a maker of vintage-style equipment can express its identity through materials — gold grilles, oak boxes and hardwood trim — rather than a loud mark. Compare Neumann, whose classic microphones the CM7 and CM67 follow, and Warm Audio, another Austin company that recreates classic studio gear at a very different price. For this guide we use gold, oak and a tuxedo gray with a serif, an unofficial interpretation; no product or logo is reproduced.
Explore & save
Keep Wunder Audio’s identity on hand — save it to a board in the Made Good inspiration library.
Wunder Audio identity set
Pin the Wunder Audio gold, oak and gray palette and the studio-classic serif register to your own board.



