, ,

Børresen Brand Guidelines: The Aalborg Loudspeaker Brand Raidho’s Founders Launched in 2018

·

Brand Guidelines · Field Guide

Børresen Brand Guidelines

The Aalborg loudspeaker brand Raidho’s founders launched in 2018.

FIG 7.0 — DRIVER AND RIBBON (ABSTRACT HOMAGE)

FIG 7.1 — REFINED SERIF
Aa

Two constants: a Børresen black, walnut and silver palette and a refined serif register. Abstract homage — not a Børresen product or mark; no loudspeaker, logo or nameplate is reproduced.

Launched
Aalborg, Denmark2018
Founders
Michael Børresen, Lars Kristensen
Known for
Iron-free driver motors, ribbon tweeters
Today
Audio Group Denmark, Aalborg
01

A name on the speaker

Raidho’s founders start again in Aalborg.

Børresen is named after its designer, Michael Børresen, the Danish engineer who co-founded the loudspeaker maker Raidho with Lars Kristensen around 2001. The Swiss site avguide.ch, which tested the Børresen 02 in 2021, gives the pronunciation as roughly “boersen.” Raidho was taken over by the Pandrup company Dantax in 2009, and the two founders left it in 2017: a Facebook post by Kristensen dated 2 July 2017, as quoted on the Audiogon forum, said they had run Raidho until the end of June and would now work full time on their other brands, the cable maker Ansuz and the electronics maker Aavik.

Those brands were already established, though sources disagree on exactly when they began. Audio Group Denmark’s website now gives 2012 for Ansuz; the Malaysian site av2day reported in August 2017 that Børresen started Ansuz the year after leaving Nordost in 2012 and Aavik in 2014; and avguide.ch wrote in October 2021 that Ansuz had entered the market eight years earlier and Aavik six. Børresen told avguide.ch that he and Kristensen had worked on Ansuz and Aavik products during their Raidho years and “sort of took with us” the results. A loudspeaker brand took longer, he said, “because we wanted to make everything from scratch, even the ribbon tweeter.”

The loudspeakers appeared in 2018. An archived copy of the brand’s first website, borresen-acoustics.com, shows a “Coming Soon!” page in August 2018; by November it listed three models — the Børresen 01 two-way monitor and the 02 and 03 2.5-way floorstanders — under the company name Børresen Acoustics ApS, Rebslagervej 4, Aalborg. There Michael Børresen, signing as “CVO,” thanked “my business partner and friend through many years, Lars Kristensen.” The online magazine pt.AUDIO reported the three models’ launch at the Rocky Mountain Audio Fest that autumn, at $30,000 and up for the 01, $45,000 for the 02 and $66,000 and up for the 03. Some dealers give 2019 as the founding year; the archived site and the show report point to 2018.

02

Colour

Iron-free motors and a lighter ribbon.

Børresen’s engineering story is about taking things out. In the 2021 interview Michael Børresen said the company had removed all the iron from its drivers’ motor systems, which he said no one had done before; his argument is that iron raises the voice coil’s inductance and so adds resonance and resistance. That claim of a first is his, and we have not tested it. Reviews of the later Z-series report a copper-clad aluminium voice coil on a ventilated titanium former.

The other half of the design is a new ribbon tweeter. pt.AUDIO reported in 2018 that Børresen set out to make a lighter ribbon and a new mid/bass driver, whose cone it described as very thin carbon fibre on each side of a 4mm Nomex honeycomb core. In 2021 avguide.ch listed the brand’s principles as the company explained them: as little iron as possible, silver rather than copper where it lowers inductance, cryogenic treatment of parts at down to −196°C, titanium in the voice coil and a ribbon tweeter with a moving mass of 0.01 grams. Its writer saw the cold chamber and the casting of silver rings in Aalborg, and was told the flagship 05 contained about 6 kg of silver per speaker in its silver version.

Børresen prefers few drivers. avguide.ch reported in 2021 that every model then on sale was a two-way or 2.5-way design, because the company considers three-way and larger designs to have too many drawbacks in phase and crossover. The cabinets of the first models were walnut-covered and shaped like a lute, with pt.AUDIO crediting “Danish furniture craftsmanship.”

The range has turned over quickly. The original 0-series, with its Cryo and Silver Supreme editions, and the Z-series are now listed as discontinued; Audio Group Denmark’s website shows the M, T, C, A and X series, with the M8 Gold Signature at the top. The A-series was shown at High End Vienna in June 2026, at €10,000 to €21,000 a pair, with deliveries from October, ecoustics reported.

Copy
Fjord black
#161412
Copy
Walnut
#5C3A21
Copy
Silver
#B8B6B0
Copy
Linen
#EFE9DF
Copy
Paper
#F8F6F2
03

Typography

Design and documentation.

Denmark has been making loudspeakers and audio equipment for a century. Bang & Olufsen was founded in Struer in 1925 by Peter Bang and Svend Olufsen, and Ortofon began in Copenhagen in 1918 as the Electrical Phono Film Company, according to English Wikipedia.

Much of the industry grew around drive units. The loudspeaker factory that became Vifa was set up in Videbæk in 1933, initially supplying Bang & Olufsen, English Wikipedia says; Vifa took over the driver maker Scan-Speak in the late 1980s and its Danish rival Peerless in 2000, and in 2005 the combined business passed to Tymphany, which sold Scan-Speak to its Danish management in 2009.

Complete-speaker brands followed: Jamo in 1968, by its own account; Dynaudio in Skanderborg in 1977; and DALI, founded by Peter Lyngdorf in 1983 and based in Nørager, according to English Wikipedia. Several have since passed to foreign owners — Dynaudio to China’s Goertek in 2014, and Jamo to Klipsch in 2005.

The makers in this guide are spread mostly across Jutland, with one on Zealand: Jamo, founded at Glyngøre on the Limfjord; Scan-Speak in Herning; Raidho at Pandrup, care of Dantax; Børresen in Aalborg; Audiovector at Skovlunde, outside Copenhagen; Densen, founded in Esbjerg and moved to North Jutland after a 2021 change of ownership; and Lyngdorf in Skive — according to their own websites and Danish trade press.

This guide sets out what can be checked about each brand — who founded it, who owns it, and what it says about where its products are made — and marks clearly what rests only on the company’s own word.

Aa

A refined serif for walnut cabinets and silver parts. (Specimen set in Cormorant Garamond, a serif STAND-IN; NOT the Børresen logo.)

Refined serif · the registerBørresen black, walnut and silver · the paletteThe Aalborg loudspeaker brand Raidho’s founders launched in 2018 · the signature

04

Børresen

One of four brands under Audio Group Denmark.

Børresen is one of four brands under Audio Group Denmark, with Aavik electronics, Ansuz cables and, since 2023, Axxess, the group says. In its 2024 annual report the operating company, Audio Group Denmark ApS of Rebslagervej 4, Aalborg, describes its main activity as developing, making and selling electronics and accessories for the hi-fi market; Kristensen and Børresen sit on its board, and Kent Vinther Sørensen is managing director. In April 2022 HiFi Pig reported that the North Jutland private-equity fund Vækst-Invest II and the incoming chief executive, Kent Sørensen, were buying 45 per cent of the group, with the two founders keeping a majority; we have not seen a later change in ownership reported.

The group has drawn in other Danish audio names. avguide.ch reported in 2021 that Flemming Rasmussen, founder of the Danish amplifier maker Gryphon, had joined Audio Group Denmark to work with Børresen after handing his own company to new owners. Børresen’s product pages now sit on the group’s website, audiogroupdenmark.com.

On where the loudspeakers are made, the group says every product is handcrafted in Aalborg, and its Børresen pages say “Handmade in Denmark”; ecoustics reported in 2026 that design and assembly take place in Aalborg. The fullest independent description comes from avguide.ch’s 2021 visit to the headquarters in a business park on the edge of Aalborg, where the writer was shown cable production, a cryogenic cold chamber and a silver foundry, and was told the company employed 32 people, plus freelancers making electrical parts at home. We have not seen a breakdown of which parts are bought in.

For a design guide, Børresen shows how a designer’s name can become the brand when he starts again from a clean sheet. Compare Raidho, the brand he co-founded and left, and Gryphon, whose founder joined his group. For this guide we use black, walnut brown and silver with a serif, an unofficial interpretation; no product or logo is reproduced.

05

Explore & save

Keep Børresen’s identity on hand — save it to a board in the Made Good inspiration library.

Børresen identity set

Pin the Børresen black, walnut and silver palette and the refined serif register to your own board.

Core Palette
Homage
Aa
Refined serif
The register
Refined serif
Gradient

♡ Save to a board

06

Source & notes

Sources: avguide.ch (Silvan Karrer, October 2021, republished by Audio Group Denmark); borresen-acoustics.com (archived August and November 2018); pt.AUDIO (November 2018); Audiogon forum (July 2017); av2day (August 2017); Audio Group Denmark (audiogroupdenmark.com, 2026) and its 2024 annual report; HiFi Pig (April 2022); ecoustics (June 2026). No official brand hex is published, so the tones here are an unofficial interpretation, and no product or mark is reproduced.